While repairing your old boat gas tanks may seem one of the viable options but when it is too much rotten and doesn’t look to provide the same efficiency as before, it’s ideal to think about putting a new tank in place. You can install plastic, stainless steel or aluminum fuel tanks as your new boat propellers but there a few considerations needed to make a good choice of material. The last thing you wish is fuel over the place while filling the cane. One of the main reasons why you should give priority to replacement of your outdated tank is safety. A fire because of leaking tank can damage you as well as your property and the only solution you look then is claiming the insurance policy you signed a year or more before.
Fuel tanks are considered the life of boats that holds gas or diesel to run them. It is can be highly inconvenient and hazardous to have a susceptible tank at or below the deck. It can catch ignition in no time that’s why it needs to stable at rough water surfaces. Aluminum fuel tanks are considered more reliable and last a significant amount of time than other alternatives. In this article, we will discuss the aluminum tank replacement treatment.
Most of the EPA standards marine gas tanks are made of aluminum and deemed the best choice for easy installation. Professional tank manufacturers, repairers, and installers recommend sticking with ABYC standards that insist fuel tanks should be permanently installed in such a manner that they do not support decks, bulkheads or other structures to aid easy maintenance or replacement in future.
The first task for you would be to remove the old tank that is lodged through safety brackets. Be prepared with instruments like a screwdriver to unscrew bolts. Here you would need to put some labor to hoist the tank.
Make sure you have disposed of all the fuel lines and hoses properly before eliminative the tank. There should not be any fuel remaining in the tank. Now the mounting patch should be modified as per the size and shape of your new EPA standards marine gas tanks. Now you can install the new tank and fasten it with brackets and screws you have removed earlier. Make sure those fasteners are all in good condition and if not, consider replacing them.
Reconnect the hoses and lines and make adjustments as required. Pour in fresh fuel in your boat gas tanks, re-inspect all the connections between tank and engine and try a test run. It is true that all this work entails very much procedures in-between so it is recommended to contact professionals for genuine advice and information regarding a boat-tank replacement.